Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

Appendix01/02 AWB8230-1413GBRFI filterRFI filters have discharge currents to earth, which, in the event ofa fault (phase failure, load unbalance), can be higher than therated values. To avoid dangerous voltages, the filters must beearthed before use.For discharge currents f 3.5 mA, VDE 0160 <strong>and</strong> EN 60335 specifythat• the protective conductor must have a cross-section f 10 mm 2or• a second protective conductor must be connected, or• the continuity of the protective conductor must be monitored.Figure 156: RFI filterhRadio interference filters DE6-LZ3-013-V4 toDE6-LZ3-064-V4 can be mounted below (footprintmounting) or – from DE6-LZ3-080-V4 – to the side of thefrequency inverter (book-type mounting).The table below lists radio interference filters with their matchingfrequency inverters.<strong>DF6</strong>-<strong>340</strong>-... RFI filter Rated voltage U e Maximum leakagecurrent in ratedoperationMaximum leakagecurrent under faultconditionsV mA mA W11K DE6-LZ3-032-V4 3 ~ 480 + 10 % < 30 280 1415K18K5 DE6-LZ3-064-V4 550 3622K30K37K DE6-LZ3-080-V4 690 3245K DE6-LZ3-115-V4 750 3855K75K DE6-LZ3-150-V4 380 4090K DE6-LZ3-220-V4 380 60110K132K DE6-LZ3-013-V4 600 50Power loss of RFI filter atrated operation166