Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

01/02 AWB8230-1413GB Motor dataType of motor stopSpecify here, how the motor is to decelerate when the OFF buttonis pressed:PNU Name Adjustable in RUN mode Value Function WENormalExtendedb091Type of motorstop– – 00 Deceleration using the deceleration ramp 0001 Free run stop (coasting)Fan controlWith PNU b092, you can specify when the fan will operate.If you enter the value 01 here, the fan runs for one minute afterthe frequency inverter power supply is switched on, allowing youto make sure that the fan is working correctly. The fan alsocontinues to run for five minutes after the connected motor hasstopped to dissipate residual heat.PNU Name Adjustable in RUN mode Value Function WENormalExtendedb092 Fan control – – 00 Fan is always switched on 0001 Fan is switched on only while the connected motor isrunning.Debug modeUnder PNU C091, set debug mode.PNU Name Adjustable in RUN mode Value Function WENormal ExtendedC091 Debug mode – j 00 Debug mode is displayed. 0001 Debug mode is not displayed.Motor dataTo ensure that the <strong>DF6</strong> frequency inverter controls the motorcorrectly <strong>and</strong> generates the greatest possible torque, you can enterthe following motor data:• Motor rating• Number of motor poles• Motor stabilization constantPNU Name Adjustable in RUN mode Value Function WENormalExtendedH003H203H004H204H006H206Motor rating – – 0.2 to 160 kW Enter the motor rating.• 0.2 to 75 kW <strong>DF6</strong>-<strong>340</strong>-11K to <strong>DF6</strong>-<strong>340</strong>-55K• 0.2 to 160 kW: from <strong>DF6</strong>-<strong>340</strong>-75KNumber ofmotor polesMotorstabilizationconstant– – 2/4/6/8 Enter the number of motor poles 4j j 0 to 255 0 function is not active 100Dependingon<strong>DF6</strong>149