Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

01/02 AWB8230-1413GB Start/stopSoftware protection (SFT)When you activate the digital input configured as SFT, theconfigured parameters cannot be overwritten unintentionally.X With PNU b031, specify whether software protection will alsoapply to the frequency setting under PNU F001.X Then, program one of the digital inputs 1 to 5 as SFT by settingthe corresponding PNU (C001 to C005) to 15.Figure 72:SFTFWD3 FW P24Digital input 3 configured as SFT (software protection)Under PNU b031, you can specify whether you want to use thenormal or extended parameter setting features in RUN mode. Ifyou set the value 10 under PNU b031, further parameters areavailable which can be modified in the RUN mode. Theseadditional parameters are marked “j” in the “Extended”column.Adjustable in RUN modeNormalExtended– jPNU Name Adjustable in RUN mode Value Function WENormalExtendedb031Softwaredependentparameterprotection– j 00 Software protection through SFT input;all functions inhibited01 Software protection through SFT input;input through PNU F001 possible0102 Software protection without SFT input;all functions inhibited03 Software protection without SFT input;input through PNU F001 possible10 Extended parameters adjustable in RUN modehThere is, however, an alternative method of softwareprotection available which does not require an SFT input.For this, enter the value 02 or 03 under PNU b031depending on whether software protection should alsoapply to the frequency setting under PNU F001 or not.81