Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

More documents

Recommendations

Info

01/02 AWB8230-1413GB Operation with LCD keypadMenu overviewThe following figure shows the sequence in which the parametersappear on the display. Table 9 provides a brief description of theparameters.PRGPRGPRGPRGFigure 40: <strong>DF6</strong> keypad menu structurea The contents of this display depends on which display parameter(PNU d001 to d090) you have selected.=Table 9:DisplayDisplayparameterd001d002d003d004d005d006d007d012d013d014d016d017d080d081d082d083d084d085d086d090BasicparametersExplanation of the parametersExplanationOutput frequency displayOutput current displayDirection of rotation displayPID feedback displayDigital inputs 1 to 5 statusStatus of relay outputs K11 to K34Scaled output frequencyMotor torqueOutput voltageElectrical input powerRunning timeMains On timeTotal fault countFirst (most recent) faultSecond faultThird faultFourth faultFifth faultSixth faultWarningF001<strong>Frequency</strong> setpoint adjustmentF002 Set acceleration time 1F202Set acceleration time 1 (second parameter set)F003 Set deceleration time 1F203Set deceleration time 1 (second parameter set)F004Direction of rotation adjustmentExtendedparametergroupsA---b---C---H---P---U---Extended functions group AExtended functions, group BExtended functions, group CExtended functions, group HExtended functions group PExtended functions group UFor a detailed description of the parameters, a section “SettingParameters”, page 103.47
Operating the <strong>DF6</strong>01/02 AWB8230-1413GBChanging display <strong>and</strong> Basic parametersPress the PRG key to switch from display or RUN mode toprogramming mode. The PRG lamp lights up in this mode.You can access the individual parameters or parameter groupswith the UP <strong>and</strong> DOWN arrow keys (a fig. 40).To access the programming mode, press the PRG key. You canmodify the parameter values with the arrow keys. Exceptions arethe display parameters PNU d001 to d090. These parameters haveno values. After you have selected a display parameter with thearrow keys, you can return to the display mode with the PRG key.The display then shows the selected display parameter(a section “Setting the display parameters”, page 104).Parameter values can be accepted with the ENTER key or rejectedwith the PRG key.To return to the display mode, press the PRG key in the displayparameter range PNU d001 to d090.Example for changing acceleration time 1: PNU F002The frequency inverter is in display mode <strong>and</strong> the RUN lamp is lit.X Press the PRG key.The frequency inverter changes to programming mode, the PRGlamp lights up <strong>and</strong> d001 or the most recently modified parameterappears on the display.X Press the DOWN key until F002 appears on the display.X Press the PRG key.The set acceleration time 1 in seconds appears on the display(default: 30.00).X To change the set value, use the UP <strong>and</strong> DOWN arrow keys.There are now two possibilities:X Accept the displayed value by pressing the ENTER key.X Reject the displayed value by pressing the PRG key.F002 appears on the display.X Press the UP key until d001 appears.X Press the PRG key.The frequency inverter changes to the display mode <strong>and</strong> displaysthe set frequency.PRGPRGabPRGF02 = 29.99ENTERPRGF02 = 30.00Figure 41: Changing acceleration time 1a Display dependent on the selected display parameter PNU d001 tod090b Display of the most recently changed parameterChanging the parameters of the extended parametergroupsThe following example illustrates how to change PNU A003 of theextended parameter group A. You can also change the parametervalues of groups B, C, H <strong>and</strong> P as described in the example. Youcan change the parameter values of group U as described insection “User-defined parameters – parameter group U”,page 150. For a detailed description of the extended parametergroups, a from section “Setting the frequency <strong>and</strong> start signalparameters”, page 107.Example for changing the base frequency: PNU A003X Press the PRG key to change to the programming mode.The most recently modified parameter appears on the display <strong>and</strong>the PRG lamp lights up.X Press the UP or DOWN key until the extended parameter groupA--- appears on the display.X Press the PRG key.A001 appears on the display.X Press the UP key twice until A003 appears on the display.X Press the PRG key.The acceleration time set under PNU A003 (default value: 50.)appears on the display.X To change the value, use the UP <strong>and</strong> DOWN arrow keys.48
Page 1 and 2: Hardware a
Page 3 and 4: • All covers and
Page 5 and 6: Contents01/02 AWB8230-1413GB4 Opera
Page 7 and 8: Contents01/02 AWB8230-1413GB- Contr
Page 9 and 10: 601/02 AWB8230-1413GB
Page 11 and 12: About the DF6 <str
Page 17 and 18: Engineering01/02 A
Page 23 and 24: Installation01/02 AWB8230-1413GBMou
Page 25 and 26: Installation01/02 AWB8230-1413GBWit
Page 27 and 28: Installation01/02 AWB8230-1413GBFit
Page 29 and 30: Installation01/02 AWB8230-1413GBEle
Page 31 and 32: Installation01/02 AWB8230-1413GBCon
Page 33 and 34: Installation01/02 AWB8230-1413GBThe
Page 35 and 36: Installation01/02 AWB8230-1413GBPES
Page 39 and 40: Installation01/02 AWB8230-1413GBPar
Page 43 and 44: Installation01/02 AWB8230-1413GBNo.
Page 45 and 46: Installation01/02 AWB8230-1413GBhRo
Page 47 and 48: Installation01/02 AWB8230-1413GBHav
Page 49: Operating the DF60
Page 53 and 54: Operating the DF60
Page 55 and 56: Operating the DF60
Page 57 and 58: Programming the ControlSignal Termi
Page 101 and 102:
Programming the ControlSignal Termi
Page 103 and 104:
Programming the ControlSignal Termi
Page 105 and 106:
10201/02 AWB8230-1413GB
Page 107 and 108:
Setting Parameters01/02 AWB8230-141
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
......Setting Parameters01/02 AWB82
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Messages01/02 AWB8230-1413GBDisplay
Page 157 and 158:
Messages01/02 AWB8230-1413GBOther m
Page 159 and 160:
Messages01/02 AWB8230-1413GBDisplay
Page 161 and 162:
Troubleshooting01/02 AWB8230-1413GB
Page 163 and 164:
Appendix01/02 AWB8230-1413GB<strong
Page 165 and 166:
Appendix01/02 AWB8230-1413GB<strong
Page 167 and 168:
Appendix01/02 AWB8230-1413GBCables
Page 169 and 170:
Appendix01/02 AWB8230-1413GBRFI fil
Page 171 and 172:
Appendix01/02 AWB8230-1413GBPNU Fun
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Index01/02 AWB8230-1413GBFlow contr
show all

Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

Create successful ePaper yourself

Delete template?

Save as template?