Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

01/02 AWB8230-1413GB St<strong>and</strong>ard form for user definedparameter settingsPNU Function Units WE Page Setpointd001 Output frequency display – – 104 – – –d002 Output current display – – 104 – – –d003 Direction of rotation display – – 104 – – –d004 PID feedback display – – 104 – – –d005 Digital inputs 1 to 5 status – – 104 – – –d006 Status of relay outputs K11 to K34 – – 104 – – –d007 Scaled output frequency – – 104 – – –d013 Output voltage – – 104 – – –d014 Electrical input power – – 104 – – –d016 Running time – – 104 – – –d017 Mains On time – – 104 – – –d080 Entire count of malfunctions which occurred – – 104 – – –d081 First fault (last fault which occurred) – – 104 – – –d082 Second fault – – 104 – – –d083 Third fault – – 104 – – –d084 Fourth fault – – 104 – – –d085 Fifth fault – – 104 – – –d086 Sixth fault – – 104 – – –d090 Warning – – 104 – – –PNU Function Units WE Page SetpointF001 <strong>Frequency</strong> setpoint value [Hz] 0.0 105F002 Acceleration time 1 [s] 30.0 105F202 Acceleration time 1 (second parameter set) [s] 30.0 105F003 Deceleration time 1 [s] 30.0 106F203 Deceleration time 1 (second parameter set) [s] 30.0 106F004 Direction of rotation• 00: Clockwise operation• 01: Anticlockwise rotation– 00(clockwise)106PNU Function Units WE Page SetpointH003 Motor rating: 0.2 to 160 kW [kW] DependingH203 Motor rating: 0.2 to 160 kW (second parameter set) [kW]on invertermodelH004 Number of motor poles: 2/4/6/8 – 4H204 Number of motor poles (second parameter set) – 4H006 Motor stabilization constant – 100H206 Motor stabilization constant (second parameter set) – 100177