Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

01/02 AWB8230-1413GB Time rampsTime rampsDuring operation, you can change over from the time ramps setunder PNU F002 <strong>and</strong> F003 to those programmed under PNU A092<strong>and</strong> A093. This can be done either by applying an external signalto input 2CH at any time or when the frequencies configured underPNU A095 <strong>and</strong> A096 are reached.ft 1 t 2PNU A0952CH/PNU A095tFigure 127: Time rampst 1 : Acceleration time 1t 2 : Acceleration time 2PNU Name Adjustable in RUN mode Value Function WENormalExtendedA092A292A093A293SecondaccelerationtimeSeconddecelerationtimej j 0.01 to 3600 s Setting times for the second acceleration <strong>and</strong> decelerationtime0.1 to 999.9 s: Resolution 0.1 s1000 to 3000 s: Resolution 1 s15A094A294Changeoverfrom the first tothe secondtime ramp– – 00 Changeover to the second time ramp if an active signal ispresent on a 2CH digital input.01 Changeover to the second time ramp when the frequenciesentered in PNU A095 <strong>and</strong>/or A096 are reached00A095A295Accelerationtimechangeoverfrequency– – 0.00 to400.0 HzHere, set a frequency at which the changeover from the firstto the second acceleration time is to take place.0.0A096A296Decelerationtimechangeoverfrequency– – 0.00 to400.0 HzHere, set a frequency at which the changeover from the firstto the second deceleration time is to take place.0.0129