Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

Appendix01/02 AWB8230-1413GBPNU Function Units WE Page SetpointA094A294A095A295A096A296A097A098Changeover from 1st time ramp to 2nd time rampthrough• 00: Input 2CH• 01: PNU A095 or A096Changeover from 1st time ramp to 2nd time rampthrough• 00: Input 2CH• 01: PNU A095 or A096(second parameter set)Changeover frequency on changeover from first tosecond acceleration timeChangeover frequency on changeover from first tosecond acceleration time (second parameter set)Changeover frequency on changeover from first tosecond deceleration timeChangeover frequency on changeover from first tosecond deceleration time (second parameter set)Acceleration characteristic• 00: Linear• 01: S curve• 02: U curve• 03: Inverted U curveDeceleration characteristic• 00: Linear• 01: S curve• 02: U curve• 03: Inverted U curve– 00 73– 00 73[Hz] 0.00 129[Hz] 0.00 129[Hz] 0.00 129[Hz] 0.00 129– 00 130– 00 131A101 Analog input OI starting frequency [Hz] 0.00 63A102 Analog input OI end frequency [Hz] 0.00 63A103 Analog input OI starting current [%] 20 63A104 Analog input OI end current [%] 100 63A105 Analog input OI condition for starting frequency00: Start at PNU A10102: Start at 0 Hz– 01 63A111 Analog input O2 starting frequency [Hz] 0.00 64A112 Analog input O2 end frequency [Hz] 0.00 64A113 Analog input O2 starting voltage [%] –100 64A114 Analog input O2 end voltage [%] 100 64A131 Curvature of acceleration characteristic, values from – 02 13101 to 10A132 Curvature of deceleration characteristic, values from01 to 10– 02 131170