Operating Instruction - Frequency Inverter 230V / 400V ... - opis.cz

Operation modeFunction0 - No deleting Values of actual value memory remain unchanged.Peak Value Long Term1 - Reset Peak Value Long-Term Ixt 231IxtPeak Value Short Term2 - Reset Peak Value Short-Term Ixt 232Ixt3 - Peak Value Vdc Reset Peak Value Vdc 2874 - Average Value Vdc Delete Average Value Vdc. 2885 - Peak Value Tc Reset Peak Value Heat Sink Temp. 2896 - Average Value Tc Delete Average Value Heat Sink Temp. 2907 - Peak Value Ti Reset Peak Value Inside Temperature 2918 - Average Value Ti Delete Average Value Inside Temperature 2929 - Peak value Irms Reset Peak Value Irms 29310 - Average value Irms Delete Average Value Irms 29411 - Peak Value Pactive pos. Reset Peak Value Active Power pos. 29512 - Peak Value Pactive neg. Reset Peak Value Active Power neg. 29613 - Average Value Pactive Delete Average Value Active Power 29716 - Energy, positive Reset parameter Energy, positive 30117 - Energy, negative Reset parameter Energy, negative 302100 - All Peak Values Reset all peak values stored101 - All Average Values Delete average values and stored values102 - All Values Delete the entire actual value memory18.4 Actual Values of the SystemThe calculation of the actual values of the system is based on the parameterized systemdata. Specific to the application, the parameters are calculated from the factors,electrical variables and the controls. The correct display of the actual values is a functionof the data of the system to be parameterized.18.4.1 Actual Value SystemThe drive can be monitored via the actual value Actual Value System 242.The Actual Frequency 241 to be monitored is multiplied by the Factor Actual ValueSystem 389 and can be read out via the parameter Actual Value System 242, i.e.Actual Frequency 241 x Factor Actual Value System 389 = Actual Value System242.Actual Value SystemNo. Description Function242 Actual Value System Calculated frequency of drive174 02/06