Operating Instruction - Frequency Inverter 230V / 400V ... - opis.cz

11.2 Stopping BehaviorThe stopping behavior of the three-phase machine can be defined via parameter OperationMode 630. Via the digital logic signals Start Clockwise 68 and Start Anticlockwise69, stopping is activated. By combining the logic signals which are assignedto the digital inputs by default, the stopping behavior can be selected from the followingtable.Stopping BehaviorStart Clockwise = 0 and Start Anticlockwise = 0Operation Mode 630Stopping behavior 0Stopping behavior 1Stopping behavior 2Stopping behavior 3Stopping behavior 4Stopping behavior 5Stopping behavior 6Stopping behavior 7Start Clockwise = 1 and Start Anticlockwise= 1Stopping behavior 0 0 1 2 3 4 5 6 7Stopping behavior 1 10 11 12 13 14 15 16 17Stopping behavior 2 20 21 22 23 24 25 26 27Stopping behavior 3 30 31 32 33 34 35 36 37Stopping behavior 4 40 41 42 43 44 45 46 47Stopping behavior 5 50 51 52 53 54 55 56 57Stopping behavior 6 60 61 62 63 64 65 66 67Stopping behavior 7 70 71 72 73 74 75 76 77Operation Mode 630 of the stopping behavior is to be parameterized according to thematrix. The selection of the operation modes can vary according to the control methodand the available control inputs.Example: The machine is to stop according to stopping behavior 2 if the digital logicsignals Start Clockwise 68 = 0 and Start Anticlockwise 69 = 0.Additionally, the machine is to stop according to stopping behavior 1 if the digital logicsignals Start Clockwise 68 = 1 and Start Anticlockwise 69 = 1.To achieve this, the parameter Operation Mode 630 must be set to 12.By selecting the stopping behavior you also select the control of a mechanical brake ifoperation mode „41- Open brake“ is used for one digital output for controlling thebrake.86 02/06