Operating Instruction - Frequency Inverter 230V / 400V ... - opis.cz

8.8 LanguageThe parameters are stored in the frequency inverter in various languages. The parameterdescription is displayed in the selected Language 33, e.g. by the PC programVPlus,.Operation modeFunction0 - Deutsch Parameter description in German1 - English Parameter description in English2 - Italiano Parameter description in Italian8.9 ProgrammingThe parameter Program(ming) 34 enables acknowledgment of a fault message andresetting to the factory settings. The display of the control unit reads "dEFLt" or "rE-SEt" and the LEDs indicate the status of the frequency inverter.SettingsFunctionThe KP 500 control unit is prepared for parameter transmission.A connected frequency inverter can receive data111 - Parameter transferfrom the control unit.110 - Normal mode Reset the KP 500 control unit to standard modeThe current error message can be acknowledged via123 - RESETdigital input S1IND or the software parameter. The displayof the control unit reads "rESEt".The parameters of the selected configuration are overwritten- except for a few exceptions - by the default4444 - Defaultsettings. The display of the control unit reads "dEFLt".Note:The parameters Control Level 28, Language 33 as well as Configuration30 are not changed during the reset to the default settings (Program(ing)34 = 4444).02/06 77