Sepam - HV/MV Protection and control units (ENG) - Trinet

InstallationUse conditionsInstallation of Sepam 2000Each Sepam 2000 comes in a single packagewhich contains:c Sepam 2000,c mounting accessories,c connection accessories (connectors).The other optional accessories come in a separatepackage.We recommend that you follow the instructions givenin this document for quick, correct installation of yourSepam 2000:c equipment identification,c assembly,c connection of current and voltage inputs, probes,c microswitch setting,c connection of power supply and earth,c checking prior to commissioning.Handling,transport and storageSepam 2000 in its original packagingTransport:Sepam 2000 may be shipped to any destinationwithout taking any additional precautions by all usualmeans of transport.Handling:Sepam 2000 may be handled without any particularcare and can even withstand being dropped by aperson handling it (person standing on floor).Environment of the installed Sepam 2000Operation in a damp environmentThe temperature/relative humidity factors must compatible with the unit’senvironmental withstand characteristics.If the use conditions are outside the normal zone, commissioning arrangementsshould be made, such as air conditioning of the premises.T (°C)5540normal use zone35 65 93 95humidity (%)Operation in a polluted atmosphereSepam 2000 is designed to be used in a clean industrial environment as definedby IEC 60654-4 class 1. A contaminated industrial atmosphere components(such as the presence of chlorine, hydrofluoric acid, sulfur, solvents…)may cause corrosion of the electronic components, in which case environmentalcontrol arrangements should be made (such as closed, pressurized premiseswith filtered air,…) for commissioning.Storage:Sepam 2000 may be stored in closed premisesfor several years. Periodic, yearly checkingof the environment and the packaging conditionis recommended.Sepam 2000 installed in a cubicleTransport:Sepam 2000 may be transported by all usual meansof transport in the customary conditions used forcubicles. Storage conditions should be taken intoconsideration for a long period of transport.Handling:Should the Sepam 2000 fall out of a cubicle, check itscondition by visual inspection and energizing. If thereis any doubt, return the Sepam 2000 for checking inthe factory.Storage:Keep the cubicle protection packing for as long aspossible. Sepam 2000, like all electronic units, shouldnot be stored in a damp environment for more than amonth. Sepam 2000 should be energized as quicklyas possible. If this is not possible, the cubiclereheating system should be activated.1/2 Installation - Use - General characteristics - Testing