Sepam - HV/MV Protection and control units (ENG) - Trinet

Contentspagepresentation 2connection 2functions supported by Jbus communication 2data available 2characteristics 2setting the communication parameters 3operating modes 3testing the link 4malfunctions 4version readout 4use of remote control bits (KTC) 5use of remote annunciation bits (KTS) 5diagnosis counters 5setting the parameters on the master 5data addresses and encoding 6presentation 6synchronization zone 6identification zone 6events zone 7grouping zone 7test zone 9control logic zone 9measurements x1 zone 11measurements x10 zone 12compact zone 13measurement (32 bits) zone 13Sepam 2000 S46 measurement zone 14configuration zone 15Jbus data encoding (analog) 16Jbus data encoding (logical) 17time tagging of events 19presentation 19other processing operations 20date and time 20synchronization clock 20description of event coding 21communication with time tagging 22synchronisation 23time tagging characteristics 24setting of time tagging parameters 24Sepam 2000 internal events 25examples 26access to remote settings 28reading of remote settings (remote reading) 28remote setting 29description of settings 31examples 32disturbance recording 34presentation 34time setting 34transfering records 34reading identification zone 34reading the contents of the different files 34acknowledging a transfer 35rereading the identification zone 35example 36appendix 38Jbus/Modbus communication1