13.07.2015 Views

Sepam - HV/MV Protection and control units (ENG) - Trinet

Sepam - HV/MV Protection and control units (ENG) - Trinet

Sepam - HV/MV Protection and control units (ENG) - Trinet

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Use - commissioningDescription / useFront face1 2 5c Status indicators 1 :v Green on indicator: lamp shows that <strong>Sepam</strong> 2000 is energized,v Red trip indicator lamp: <strong>Sepam</strong> 2000 has tripped the circuit breaker afterdetecting a fault. A related alarm message indicates the cause of tripping,v Red indicator: lamp shows internal <strong>Sepam</strong> faults. All the output relays aredropped out (fail-safe position). Refer to the chapter on maintenance,v Green test indicator: <strong>Sepam</strong> 2000 is in this mode. Refer to the "Testing" chapter.c Display 2The display unit indicates operating <strong>and</strong> maintenance messges.123453 4status indicatorsdisplaykeys for access to alarm processingcartridgepocket terminal pocketc Keys for access to alarm processing 3 :v Alarm processing keyv alarm key:each time tripping or another event occurs, an alarm message stored in a listof alarms is displayed.The most recent message appears on the display.This key provides access to step by step reading of the list of stored alarmmessages.The previous message may be displayed by pressing this key.Display of: ----------- indicates the end of the list of alarm messages.v reset key: the protections trigger circuit breaker tripping <strong>and</strong> displayof the related messages.The red trip indicator lamp lights up. After the fault has been cleared, the userpresses the reset key to acknowledge. The trip indicator is extinguished, the listof alarms is erased <strong>and</strong> the device can be closed. The reset key is disabled untilthe fault has been cleared.v lamp test keys: indicator lamp <strong>and</strong> display unit operation may be testedby pressing the two keys at the same time.c Cartridge 4The cartridge contains the information required for <strong>Sepam</strong> 2000 operation,such as:v Settings,v Stored data,v Control <strong>and</strong> monitoring logicÉc Pocket terminal socket 5This socket is used to connect the TSM 2001 pocket terminal or the ACE 900adapter to the SFT 2801 / SFT 2821 kit (PC link).statusindicators1diplay2keys32/2 D21 - D22 - D31 - Installation - Use - Commissioning

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!