Sepam - HV/MV Protection and control units (ENG) - Trinet

display function ansi pocket parameters commands setting limitsmessagesterminalitemDIR. O/C directional 67 F511* curve choice of data + and - keys DT, SIT, VIT, EIT,UITovercurrent F521 tripping curveIs setting numeric keys DT: 0.3 to 24Inand unitsSIT, VIT, EIT, UIT:0.3 to 2.4InT time delay numeric keys DT: 0.05 to 655 sand unitsSIT, VIT, EIT, UIT:0.1 to 12.5 s at 10 Isangle characteristic data + and - keys 30°, 45° or 60°anglePhi1 phase shift metring between I1 and U32Phi2between I2 and U13Phi3between I3 and U21EARTH FAULT earth fault 50N/51N F061 to curve choice of data + and - keys DT, SIT, VIT, EIT, UIT50G/51G F064tripping curveF081 to Iso setting numeric keys DT with:F084and unitsSum3I: 0.05 to 10InCT+CSH 30: 0.05 to 10InoCSH 2A: 0.1 to 20 ACSH 30A: 1.5 A to 300 ACore bal. CT+ ACE 990:0.05 to 10 InoSIT, VIT, EIT, UIT with:Sum3I: 0.05 to InCSH 30: 0.05 to 10InoCSH 2A: 0.1 to 2 ACSH 30A: 1.5 A to 300 ACore bal. CT + ACE 990:0.05 to InoT time delay numeric keys DT: 50 ms to 655 sand unitsSIT, VIT, EIT, UIT:0.1 to 12.5 s at 10 IsoDIR. E/F directional 67N F501 Iso setting numeric keys Sum3I: 0.05 to 10Inearth fault and units CSH 30: 0.05 to 10InoCSH 2A: 0.1 to 20 ACSH 30A: 1.5 A to 300 ACore bal. CT + ACE 990:0.05 to 10 InoT time delay numeric keys 0.05 to 655 sand unitsangle characteristic data + and - keys 0°, 15°, 30°, 45°, 60°,angle 90°, -45°Phi0 phase shift metering between Io and VoNEUTR. O/C1 neutral 50N/51N F091 curve choice of data + and - keys DT, SIT, VIT, EIT, UITNEUTR. O/C2 unbalance F092 tripping curveor E/F IO’F071 Iso setting numeric keys DT with:F072 and units Sum3I: 0.05 to 10InCT+CSH 30: 0.05 to 10 InoCSH 2A : 0.1 to 20 ACSH 30A:1.5 A to 300 ACore bal. CT + ACE 990:0.05 to 10 InoSIT, VIT, EIT, UIT, with:Sum3I: 0.05 to InCT+CSH 30:1.5 A to 300 ACore bal. CT + ACE 990:0.05 to InoCSH 2A: 0.1 to 2 ACSH 30A: 1.5 to 30 AT time delay numeric keys DT: 50 ms to 655 sand unitsSIT, VIT, EIT, UIT:0.1 to 12.5 s at 10 IsoRET** H2 restraint data + and - keys yes / noOVERFREQ. 1 overfrequency 81H F571 Fs setting numeric keys for 50 Hz: 50 to 55 HzOVERFREQ. 2 F572 and units for 60 Hz: 60 to 65 HzT time delay numeric keys 0.1 to 655 sand units* for Sepam 2000 S25 and S35.** for F081 to F084 and F091, F092 only.Installation - Use - General characteristics - Testing2/15