Sepam - HV/MV Protection and control units (ENG) - Trinet

Use - commissioningCommissioning (cont’d)display function ANSI pocket parameters commands setting limitsmessagesterminalitemOVERVOLT. 1 overvoltage 59 F301 Us setting numeric keys 0.5 to 1.5UnOVERVOLT. 2 F302 and unitsF311T time delay numeric keys 0.05 to 655 sand unitsN VOLT DISP neutral voltage 59N F391, F392 Vso setting numeric keys 0,02 to 0.8Undisplacement F411, F412 and units (VT: Un/e/100/e)0.05 to 0.8Un(VT: Un/e/100/3)T time delay numeric keys 0.05 to 655 sand unitsU/CURRENT undercurrent 37 F221 Is setting numeric keys 0.05Ib to Iband unitsT time delay numeric keys 0.05 to 655 sand unitsUNDERFREQ.1 underfrequency 81 F561 Fs setting numeric keys for 50 Hz: 45 to 50 HzUNDERFREQ.2 F562 and units for 60 Hz: 55 to 60 HzT time delay numeric keys 0.1 to 655 sand unitsUNDERVOLT.1 undervoltage 27 F241 Us setting numeric keys 0.05 Unp to UnpUNDERVOLT.2F321, F322and unitsF331, F332T time delay numeric keys 0.05 to 655 sF341, F342and unitsF361, F362F371, F372remanent 27R F351, F352 Us setting numeric keys 0.05 Un to Unundervoltageand unitsT time delay numeric keys 0.05 to 655 sand unitsSTARTS/HOUR checking of 66 F421 Nstart starts per numeric keys 1 to 60number of hour and unitsstartsH start number of warm numeric keys 1 to 60starts per hour/Nstart and unitsC start number of cold numeric keys 1 to 60starts per hour/Nstart and unitsT time delay numeric keys 0.5 s to 655 sand unitsN.rest nb. of possible meteringor starts orT.block blocking timeREVERSEP. reverse real 32P F531 Ps setting numeric keys 1% to 120% of Snpowerand unitsT time delay numeric keys 0.1 to 655 sand unitsRTD XX temperature 38/49T F461 to Ts1 to temperature numeric keys 0°C to 180°Cmonitoring F466 Ts2 settings and unitsXX = 1 to 12F471 toF4762/16 Installation - Use - General characteristics - Testing