Sepam - HV/MV Protection and control units (ENG) - Trinet

Use - commissioningDescription/use (cont'd)TSM 2001 pocket terminal /SFT 28011 4-line display2data entry keypadThe TSM 2001 pocket terminal and the SFT 2801 software for PC operate in thesame way.The pocket terminal provides access to allthe Sepam 2000 information, such as:c current measurements,c operating assistance messages,c protection settings.The pocket terminal is supplied with power by Sepam 2000 and does not requireany batteries; it can be connected with the power on.The pocket terminal beeps when it is connected.The main menu appears (if nothing is displayed, check the brightness adjustmentusing the key).The user may access the various items of information from three menu levels.A menu may comprise several pages.To access a menu, simply position the blinking cursor on the desired line and pressthe enter key.The first line of the menu contains the name of the current menu or function.Indication of P/ at the head of the menu indicates that the user has enteredthe password.P/Select:MeteringProtectionProgram logicP/Select:Add. readingStatusAbout SepamRole of the keys:c the pocket terminal beeps when the user presses a key that is disabled.c the menu key is used to display the previous menu,c the ▲ and ▼ keys are used to move the c cursor one line up or down in a menu.To move to the next screen of a menu, the user simply positions the cursor on thelast line and presses the ▼key.To move to the previous screen of a menu, the user simply positions the cursor onthe second line and presses the ▲ key,c the code key is used to enter and exit the parameter setting mode,c the numeric and . keys are used to enter settings and the password,c the units key is used to change setting unit multiplying factors (e.g. A, kA,...),c the data+ and data- keys are used to select values from preset data lists.These lists are used when only a limited number of values may be usedfor a parameter, e.g. network frequency value,c the clear key is used:v to clear error messages,v to call back a previous setting value during data input,v to reset tripping currents and maximum demand readings to zero,c the enter key is used to confirm a menu selection or to confirm all the settingsfor a function.N.B. The first line always contains the name of the current menu or function.2/4 Installation - Use - General characteristics - Testing