Contents

User Parameter Tables
•Torque Detection: L6
Parameter
Number
L6-01
L6-02
L6-03
L6-04
Name
Display
Torque
detection selection
1
Torq Det 1 Sel
Torque detection
level 1
Torq Det 1 Lvl
Torque detection
time 1
Torq Det 1 Time
Torque detection
selection 2
Torq Det 2 Sel
Description
0: Torque detection disabled.
1: Car stuck detection only with
speed agreement; operation
continues (warning is output).
2: Car stuck detected
continuously during operation;
operation continues
(warning is output).
3: Car stuck detection only with
speed agreement; output
stopped upon detection.
4: Car stuck detected
continuously during operation;
output stopped upon detection.
5: Undertorque detection only
with speed agreement;
operation continues (warning
is output).
6: Undertorque detected
continuously during operation;
operation continues
(warning is output).
7: Undertorque detection only
with speed agreement; output
stopped upon detection.
8: Undertorque detected
continuously during operation;
output stopped upon detection.
Vector control: Motor rated torque
is set as 100%.
V/f control: Inverter rated current
is set as 100%.
Sets the overtorque/undertorque
detection time.
Setting
Range
Factory
Setting
Control Methods
V/f
Open
Loop
Vector
Closed
Loop
Vector
Change
during
Operation
MEMO-
BUS
Register
Page
0 to 8 4 No A A A 4A1H 5-34
0 to 300 150% No A A A 4A2H 5-34
0.0 to
10.0
0.1 s No A A A 4A3H 5-34
0 to 8 0 No A A A 4A4H 5-34
4
L6-05
L6-06
Torque detection
level 2
Torq Det 2 Lvl
Torque detection
time 2
Torq Det 2 Time
See L6-01 to L6-03 for a description.
0 to
300
0.0 to
10.0
150% No A A A 4A5H 5-34
0.1 s No A A A 4A6H 5-34
4-33