Contents

Displaying User-set Parameters Only
The A2 parameters (user-set parameters) and A1-01 (parameter access level) can be used to establish a parameter
set that contains only the most important parameters.
Set the number of the parameter to which you want to refer in A2-01 to A2-32, and then set A1-01 to 1. Using
the advanced programming mode you can read and modify A1-01 to A1-03 and the parameters set in A2-01 to
A2-32 only.
•Related Parameters
Parameter
No.
A2-01
to
A2-32
Name
Factory
Setting
Change
during
Operation
V/f
Control Methods
Open
Loop
Vector
Closed
Loop
Vector
User setting parameters - No A A A
5-64