Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User Parameter Tables<br />
•Speed Control (ASR): C5<br />
Name<br />
Description<br />
Display<br />
Parameter<br />
Number<br />
C5-01<br />
C5-02<br />
C5-03<br />
C5-04<br />
C5-06<br />
C5-08<br />
C5-09<br />
C5-10<br />
ASR proportional<br />
(P) gain 1<br />
ASR P Gain 1<br />
ASR integral (I)<br />
time 1<br />
ASR I Time 1<br />
ASR proportional<br />
(P) gain 2<br />
ASR P Gain 2<br />
ASR integral (I)<br />
time 2<br />
ASR I Time 2<br />
ASR delay time<br />
ASR Delay Time<br />
ASR integral (I)<br />
limit<br />
ASR I Limit<br />
ASR proportional<br />
(P) gain 3<br />
ASR P Gain 3<br />
ASR integral (I)<br />
time 3<br />
ASR I Time 3<br />
Set the proportional gain 1 and the<br />
integral time 1 of the speed control<br />
loop (ASR) for the minimum frequency.<br />
The settings becomes active for<br />
acceleration only.<br />
Set the proportional gain 2 and the<br />
integral time 2 of the speed control<br />
loop (ASR) for the maximum frequency.<br />
Sets the filter time constant; the time<br />
from the speed loop to the torque<br />
command output. Usually changing<br />
this setting is not necessary.<br />
Setting<br />
Range<br />
1.00 to<br />
300.00<br />
0.000 to<br />
10.000<br />
1.00 to<br />
300.00<br />
0.000 to<br />
10.000<br />
0.000 to<br />
0.500<br />
Factory<br />
Setting<br />
Control Methods<br />
V/f<br />
Open<br />
Loop<br />
Vector<br />
Closed<br />
Loop<br />
Vector<br />
Change<br />
during<br />
Operation<br />
MEMO-<br />
BUS<br />
Register<br />
Page<br />
40.00 Yes No No Q 21BH 5-29<br />
0.500 s Yes No No Q 21CH 5-26<br />
20.00 Yes No No Q 21DH 5-26<br />
0.500 s Yes No No Q 21EH 5-26<br />
0.004 No No No Q 220H 5-26<br />
Set the parameter to a small value to<br />
prevent any radical load change. A<br />
0 to 400<br />
setting of 100% is equal to the maximum<br />
400% No No No A 222H 5-26<br />
output<br />
frequency.<br />
Set the proportional gain 3 and the<br />
integral time 3 of the speed control<br />
loop (ASR) for the minimum frequency.<br />
The settings becomes active for<br />
deceleration only.<br />
1.00 to<br />
300.00<br />
0.000 to<br />
10.000<br />
40.00 Yes No No Q 22EH 5-26<br />
0.500 s Yes No No Q 231H 5-26<br />
4<br />
•Carrier Frequency: C6<br />
Parameter<br />
Number<br />
C6-02<br />
Name<br />
Display<br />
Description<br />
Carrier frequency<br />
selection 1: 2 kHz<br />
Selects the carrier frequency.<br />
2: 5 kHz<br />
3: 8 kHz<br />
CarrierFreq Sel 4: 10 kHz<br />
5: 12.5 kHz<br />
6: 15 kHz<br />
Setting<br />
Range<br />
Factory<br />
Setting<br />
Control Methods<br />
V/f<br />
Open<br />
Loop<br />
Vector<br />
Closed<br />
Loop<br />
Vector<br />
Change<br />
during<br />
Operation<br />
MEMO-<br />
BUS<br />
Register<br />
Page<br />
1 to 6 3 No A A A 224H 5-2<br />
4-15