You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note: 1. When changing the display with the Increment / Decrement keys, the next display after the one for the last parameter number will be the one for the<br />
first parameter number and vice versa. For example, the next display after the one for U1-01 will be U1-55. This is indicated in the figures by the letters<br />
A and B and the numbers 1 to 6.<br />
2. The display for the first monitor parameter (frequency reference) will be displayed when power is turned ON. The monitor item displayed at startup<br />
can be set in o1-02 (Monitor Selection after Power Up).Operation cannot be started from the mode selection display.<br />
Quick Programming Mode<br />
In quick programming mode, the basic parameters required for the elevator operation like speeds, acceleration/deceleration<br />
times etc. can be monitored and set.<br />
The parameters can be changed from the setting displays. Use the Increment, Decrement, and Shift/RESET<br />
keys to change the frequency. The parameter will be written and the monitor display will be returned to when<br />
the DATA/ENTER key is pressed after changing the setting.<br />
Refer to Chapter 4, User Parameters for details on the parameters displayed in quick programming mode.<br />
•Example Operations<br />
Example key operations in quick programming mode are shown in the following figure.<br />
Mode Selection Display<br />
Monitor Display<br />
Setting Display<br />
MENU<br />
-DRIVE-<br />
** Main Menu **<br />
Operation<br />
MENU<br />
A<br />
B<br />
-QUICK-<br />
** Main Menu **<br />
Quick Setting<br />
ESC<br />
-QUICK-<br />
Control Method<br />
A1-02 = 0 *0*<br />
V/f Control<br />
"0"<br />
ESC<br />
-QUICK-<br />
Control Method<br />
A1-02 = 0 *0*<br />
V/f Control<br />
"0"<br />
MENU<br />
-ADV-<br />
** Main Menu **<br />
Programming<br />
-QUICK-<br />
Accel Time 1<br />
C1-01 = 1.50sec<br />
(0.00 ~ 600.00)<br />
"1.50"<br />
ESC<br />
-QUICK-<br />
Accel Time 1<br />
C1-01 =001.50sec<br />
(0.00 ~ 600.00)<br />
"1.50"<br />
MENU<br />
-VERIFY-<br />
** Main Menu **<br />
-QUICK-<br />
Decel Time 1<br />
C1-01 = 1.50sec<br />
(0.00 ~ 600.00)<br />
"1.50"<br />
ESC<br />
-QUICK-<br />
Decel Time 1<br />
C1-01 =001.50sec<br />
(0.00 ~ 600.00)<br />
"1.50"<br />
Modified Consts<br />
MENU<br />
-A.TUNE-<br />
** Main Menu **<br />
ESC<br />
-QUICK-<br />
Mtr Rated Power<br />
E2-11 = 4.00kW<br />
(0.00 ~ 650.00)<br />
"4.00kW"<br />
-QUICK-<br />
Mtr Rated Power<br />
E2-11 = 004.00kW<br />
(0.00 ~ 650.00)<br />
"4.00kW"<br />
Auto-Tuning<br />
-QUICK-<br />
MOL Fault Select<br />
L1-01=1 *1*<br />
Std Fan Cooled<br />
"1"<br />
ESC<br />
-QUICK-<br />
MOL Fault Select<br />
L1-01 = 1 *1*<br />
Std Fan Cooled<br />
"1"<br />
A<br />
B<br />
Fig 3.26 Operations in Quick Programming Mode<br />
3-8
Change language