Contents

User Parameter Tables
Factory Settings that Change with the Control Method (A1-02)
Parameter
Number
Name Setting Range Unit
V/f Control
A1-02=0
Factory Setting
Open
Loop
Vector
A1-02=2
Closed
Loop
Vector
A1-02=3
C3-01 Slip compensation gain 0.0 to 2.5 - 1.0 1.0 1.0
E1-08 Mid. output frequency voltage (VB) *2 0.0 to 255.0
(0.0 to 510.0)
E1-09 Min. output frequency (FMIN)
0.0 to 120.0
*4
E1-10 Min. output frequency voltage (VMIN) *2 0.0 to 255.0
(0.0 to 510.0)
0.1 V
0.1 Hz
0.1 V
20.0
*2*3
0.5
*2
12.5
*2*3
12.5 0.0
0.3 0.0
2.0 0.0
S1-01 O speed level 0.0 to 10.0 0.1 Hz 1.2 0.5 0.1
S1-04 DC injection braking time at stop 0.00 to 10.00 0.01 sec 0.50 0.30 0.00
* 1. The settings are 0.05 (Closed Loop Vector) / 2.00 (Open Loop vector) for inverters of 55kW or larger.
* 2. Settings vary as shown in the following tables depending on the Inverter capacity and E1-03.
* 3. The settings shown are for 200 V class Inverters. The values will double for 400 V class Inverters.
4
4-51