Quartus II Settings File Reference Manual - Altera

17–2 Chapter 17: TimeQuest Timing Assignments
DO_COMBINED_ANALYSIS
DO_COMBINED_ANALYSIS
Type
Analyzes both the fast corner (min delays) and the slow corner (max delays) and
reports the results from each analysis.
Directs the TimeQuest analyzer to run and report timing results using both the Fast
timing model (best-case) and slow timing model (worst-case). The results of each
analysis are reported in the Fast Timing and Slow Timing folders of the TimeQuest
analyzer report. When you run a combined fast or slow analysis, the netlist is
annotated only with worst-case timing model results.
Boolean
Device Support
This setting can be used in projects targeting the following device families:
■ Arria GX
■ Arria II GX
■ Arria II GZ
■ Cyclone
■ Cyclone II
■ Cyclone III
■ Cyclone III LS
■ Cyclone IV E
■ Cyclone IV GX
■ HardCopy II
■ HardCopy III
■ HardCopy IV
■ MAX II
■ MAX V
■ Stratix
■ Stratix GX
■ Stratix II
■ Stratix II GX
■ Stratix III
■ Stratix IV
Syntax
set_global_assignment -name DO_COMBINED_ANALYSIS
Quartus Settings File June 2012 Altera Corporation
Reference Manual