Quartus II Settings File Reference Manual - Altera

Chapter 6: Fitter Assignments 6–317
STRATIXGX_ALLOW_CLOCK_FANOUT_WITH_ANALOG_RESET
STRATIXGX_ALLOW_CLOCK_FANOUT_WITH_ANALOG_RESET
Type
Allows the Compiler to enable netlist placements and routing where the dedicated
reference clock pad in a quad, that has a gigabit transceiver block Transmitter PLL
with its pll_reset or pllenable signal connected or has only Receivers which have
their rxanalogreset signals connected, to feed other quads or core logic. Also allows
the Compiler to enable netlist placements where a gigabit transceiver block
Transmitter PLL exists in a quad that has only receivers which have their
rxanalogreset signals connected.
Boolean
Device Support
This setting can be used in projects targeting the following device families:
■ Stratix GX
Syntax
set_global_assignment -name STRATIXGX_ALLOW_CLOCK_FANOUT_WITH_ANALOG_RESET
Default Value
Off
June 2012 Altera Corporation Quartus Settings File
Reference Manual