Quartus II Settings File Reference Manual - Altera

Revision History
© 2012 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos
are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and
services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service
described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
Quartus Settings File
Reference Manual
June 2012
Additional Information
The Quartus ® II design software settings are made in the Quartus II Settings File
(.qsf).
The following table shows the revision history for this manual.
Date and
Document Version Changes Made Summary of Changes
June 2012, v12.0 ■ Updated for Quartus II version 12.0 —
December 2011, v10.0 ■ Updated for Quartus II version 11.1 —
May 2011, v9.0 ■ Updated for Quartus II version 11.0 —
December 2010, v8.0 ■ Updated for Quartus II version 10.1 —
September 2010, v7.0 ■ Updated for Quartus II version 10.0 —
December 2009, v6.0 ■ Updated for Quartus II version 9.1 —
November 2008, v5.0 ■ Updated for Quartus II version 8.1
—
■ Undated new document template
■ Updated “Revision History” section
September 2008, v4.2 ■ Minor editorial updates —
September 2008, v4.1 ■ Minor editorial updates —
July 2008, v4.0 ■ Updated for Quartus II version 8.0 —
December 2007, v3.0 ■ Updated for Quartus II version 7.2 —
ISO
9001:2008
Registered