Student Handbook and Catalog 2021-22 V2

Course Descriptions | 205
IMED 2388 Internship - Digital Communication and Media/
Multimedia (0-0-3) A work-based learning experience that enables
the student to apply specialized occupational theory, skills and
concepts. A learning plan is developed by the college and the
employer. Prerequisite ITSE 2313, IMED 2309, IMED 2315
INEW
INEW 2332 Comprehensive Software Project: Coding, Testing,
and Implementation (2-2-3) A comprehensive application of skills
learned in previous semesters in a simulated workplace. Includes
coding, testing, maintenance, and documentation of a complete
software and/or hardware solution. This course may be used as a
capstone course for a certificate or degree.
INMT
INMT 1305 Introduction to Industrial Maintenance (2-4-3) Basic
mechanical skills and repair techniques common to most fields
of industrial maintenance. Topics include precision measuring
instruments and general safety rules common in industry, including
lock-out/tag-out.
INMT 1317 Industrial Automation (2-4-3) Applications of industrial
automation systems including identification of system requirements,
equipment integration, motors, controllers, and sensors. Coverage
of set-up, maintenance, and testing of the automated system.
Prerequisite CETT 1303, CETT 1305
INMT 1355 Industrial Power Plant Systems (2-4-3) Study the
principles of operation and maintenance of industrial power plants.
Emphasis placed on component replacement, tune-up, and field
adjustments of engine systems. Prerequisite INMT 1305
INMT 2301 Machinery Installation (2-4-3) Students utilize skills
acquired in previous studies. Machinery foundation, locations,
installation, and alignment activities are practiced and tested.
Emphasis is on the various methods of shaft alignment including
laser shaft alignment. Prerequisite INMT 1305
INMT 2303 Pumps, Compressors & Mechanical Drives (2-4-3) A
study of the theory and operations of various types of pumps and
compressors. Topics include mechanical power transmission systems
including gears, v-belts, and chain drives. Prerequisite INMT 1305
INMT 2345 Industrial Troubleshooting (2-4-3) An advanced
study of the techniques used in troubleshooting various types of
industrial equipment to include mechanical, electrical, hydraulic,
and pneumatic systems and their control devices. Emphasis will be
placed on the use of schematics and diagrams in conjunction with
proper troubleshooting procedures. Prerequisite ELPT 1341
INTC
INTC 1305 Introduction to Instrumentation (2-4-3) A survey of the
instrumentation field and the professional requirements of the
instrumentation technician. Prerequisite CETT 1303 (Prerequisite or
Corequisite)
INTC 1341 Principles of Automatic Control (2-4-3) Basic
measurements, automatic control systems and design, closed
loop systems, controllers, feedback, control modes, and control
configurations.
INTC 1343 Application of Industrial Automatic Controls (2-4-3)
Automatic process control including measuring devices, analog
and digital instrumentation, signal transmitters, recorders, alarms,
controllers, control valves, and process and instrument diagrams.
Includes connection and troubleshooting of loops.
INTC 1348 Analytical Instrumentation (1-5-3) Analytical
instruments emphasizing utilization in process applications.
Includes, but not limited to, chromatography, pH, conductivity, and
spectrophotometric instruments. Prerequisite INTC 1341
INTC 1350 Digital Measurement and Controls (1-5-3) Basic
measurement control instrumentation. Includes movement of
digital data through common systems employing parallel and serial
transfers. Prerequisite RBTC 1301
INTC 1355 Unit Operations (2-4-3) Automatic control requirements
of industrial processes. Includes control systems, control loop
tuning, and analysis. Prerequisite INTC 1341
INTC 1356 Instrumentation Calibration (2-4-3) Techniques for
configuring and calibrating transmitters, controllers, recorders,
valves, and valve positioners. Prerequisite INTC 1355
INTC 2310 Principles of Industrial Measurements II (1-5-3)
Additional principles of measurement. Includes devices used to
measure process variables and basic control functions. Prerequisite
INTC 1355
INTC 2330 Instrumentation Systems Troubleshooting (2-4-3)
Techniques for troubleshooting instrumentation systems in a
process environment. Includes troubleshooting upsets in processes.
Prerequisite INTC 1343
INTC 2333 Instrumentation Systems Installation (1-5-3) Synthesis,
application, and integration of instrument installation components.
Includes a comprehensive final project. Prerequisite INTC 1355
INTC 2336 Distributed Control and Programmable Logic (1-5-3)
An overview of distributed control systems including configuration
of programmable logic controllers, smart transmitters, and field
communicators. Functions of digital systems in a process control
environment. Prerequisite RBTC 1301 (Prerequisite or Corequisite)
INTC 2339 Instrument and Control Review (2-4-3) An overview
of instrument and control technology in preparation for industry
employment and national testing. Prerequisite INTC 1343
INTC 2350 Fieldbus Process Control Systems (1-5-3) A
comprehensive view of fieldbus systems using theory, applications,
and hands-on experiences. Prerequisite INTC 2333
Texas State Technical College
tstc.edu