03.01.2013 Views

Declaration of Conformity - Nokia

Declaration of Conformity - Nokia

Declaration of Conformity - Nokia

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Camera<br />

74<br />

● To return to the viewfinder to record a new video<br />

clip, press the capture key.<br />

Camera settings<br />

There are two kinds <strong>of</strong> settings for the camera:<br />

setup settings and main settings. The setup settings<br />

return to the default settings after you close the<br />

camera, but the main settings remain the same<br />

until you change them again. To adjust the setup<br />

settings, use the options in the active toolbar. See<br />

"Colour and lighting settings", p. 75. To change<br />

the main settings, in the image or video mode,<br />

select Options > Settings.<br />

Still image camera settings<br />

To change the main settings, in the image mode,<br />

select Options > Settings and from the following:<br />

● Image quality — Set the resolution (main<br />

camera only). The better the image quality, the<br />

more memory the image consumes.<br />

● Add to album — Save the image to an album in<br />

Photos.<br />

● Record location — To add GPS location<br />

coordinates to each image file, select On.<br />

Receiving a GPS signal may take time or the signal<br />

may not be available. See "Location<br />

information", p. 69.<br />

● Show captured image — Select whether to<br />

view the captured image after it is taken or to<br />

continue image capturing immediately.<br />

● Default image name — Define the default<br />

name for the captured images.<br />

● Extended digital zoom — The setting is only<br />

available in the main camera.On (continuous)<br />

allows the zoom increments to be smooth and<br />

continuous between digital and extended digital<br />

zoom, On (paused) allows the zoom increments<br />

to pause at the digital and extended digital step<br />

point, and Off allows a limited amount <strong>of</strong> zoom<br />

while retaining the image resolution. Use the<br />

extended zoom only when getting closer to the<br />

subject is more important than the final image<br />

quality. The overall quality <strong>of</strong> a digitally zoomed<br />

image is always lower than that <strong>of</strong> an unzoomed<br />

image.<br />

● Capture tone — Set the tone that sounds when<br />

you capture an image.<br />

● Memory in use — Select where to store your<br />

images.<br />

● Rotate image — Select whether you want<br />

images that are captured when the device is held<br />

upright to be rotated when you open them in<br />

Gallery.<br />

● Restore camera settings — Restore the camera<br />

settings to default values.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!