Modélisation du processus de pilotage d'un atelier - Les thèses en ...

Références bibliographiques partie II
[Gere, 1966] W. S. Gere, “Heuristics in jobshop scheduling”, Management Science, Vol. 13,
No. 1, pp. 167-175, 1966.
[Gogg, 1993] J. Gogg, “Introduction to simulation”, proceedings of Winter Simulation
Conference, pp. 9-17, 1993.
[Glover et Laguna, 1997] F. Glover and M. Laguna, “Tabu search”, Kluwer Academic
Publishers, Boston, 1997.
[Goldberg, 1989] D. Goldberg, “Genetic algorithms in search, optimization & machinelearning”,
Addison-Wesley, 1989.
[Gupta et Sivakumar, 2002] A. K. Gupta and A. I. Sivakumar, “Simulation based
Multiobjective Schedule Optimization in Semiconductor Manufacturing”, Proceedings of the 2002
Winter Simulation Conference, Institute of Electrical and Electronics Engineers, Piscataway, 2002.
[Hicks, 1999] D.A. Hicks, “A four step methodology for using simulation and optimization
technologies in strategic supply chain planning”, Proceedings of the 1999 Winter Simulation
Conference, 1999.
[Holland, 1975] J. Holland, “Adaptation in Natural and Artificial Systems”, University of
Michigan Press, Ann Harbor, 1975.
[Hurrion, 1976] R.D. Hurrion, “The design use and required facilities of an interactive visual
computer simulation language to explore production planning problems”, PhD Thesis, University of
London.
[Kosturiak et Milan, 1997] Jan Kosturiak et Milan Gregor, “FMS simulation : some
experience and recommendations ”, Revue Simulation Practice and Theory n°6, pp. 423-442, 1997.
[Jain et Meeran, 1999] A.S. Jain and S. Meeran, “Deterministic job shop scheduling: past,
present and future”, European Journal of Operational Research, Vol.113, pp. 390, 1999.
[Klingstam et Gullander, 1999] P. Klingstam, P. Gullander, “Overview of simulation tools
for computer-aided production engineering”, Computers in Industry 38, pp. 173,186, 1999.
[Koza, 1992] J.R. Koza, “Genetic programming: on the programming of computers by means
of natural selection”, The MIT Press, Cambridge, 1992.
[Law et Kelton, 1991] A.M. Law, W.D. Kelton, “Simulation modelling and analysis”, 2 nd
edition, McGraw-Hill, New York, 1991.
[Ly et al., 2000 ] F. Ly, A.K.A Toguyeni et E. Craye, “Indirect predictive monitoring flexible
manufacturing system”, Robotics and Computer Integrated Manufacturing systems. Elsevier Science,
Vol. 16, pp. 321-338, 2000.
[Marty, 1997] Claude Marty, Livre “Le juste-à-temps : produire autrement”, edition Hermès,
Paris, 1997.
74