molded case circuit breakers - Eaton Canada

136
ACCESSORIES
IQ PRODUCTS
Electronic Metering and Motor Protection
Accessories
IQ Flange IQ Surface Mount Enclosure IQ Floor Mounted Enclosure
For applications where extra door mounting
space is required, a flange-mounting
unit is available. The IQ Flange provides an
extra 2.5 in. of clearance for the device.
Description Catalog Number
IQ Flange Option, to provide IQFLANGE
extra clearance when
mounting
IQ DC Power Supply
The IQ DC Power Supply is a DC to AC
invertor module intended for use where
DC power is available, but some AC is
required. The unit will operate several IQ
1000 IIs, IQ Data Plus IIs, Assemblies Electronic
Monitor IIs, or other AC powered IQ
devices requiring no more than 30 VA of
power at any power factor.
Description Catalog Number
IQ DC Power Supply IQDCPS
NEMA 1, 12, 3R
Heavy Gauge #14 painted ASA-61. Enclosure
for mounting IQ family products on
wall, panels, or doors without making
large cutouts. Six mounting holes and
mounting hardware included. Includes
drilling for (three) PB1/PB2 devices. The
IQ or PB products are not included.
Description Style Number
7.375 in. W x 16.25 in. H x 2147A95G33
6.13 in. D for use with IQ Data
Plus II, with or without
communications.
IQ Cable
For applications where remote mounting
of the power supply is required, a 36 in.
extension cable is available.
Two types of cable are available. The first
(catalog number IQ CABLE) is for the IQ
Data, Generator, and Data Plus II. The
second (catalog number IQA CABLE) is
exclusively for the IQ Analyzer.
Description Catalog Number
36 in. extension cable IQCABLE
IQ Data, Generator,
Data Plus II
36 in. extension cable
IQ Analyzer
45 in. extension cable
IQ Analyzer
IQACABLE
IQA45CABLE
NEMA 1, 12, 3R
Standard AMPGARD © structure construction,
painted ASA-61. To be used as a lineup
extension for mounting IQ products.
Each 10 in. wide section comes with (two)
doors with “works-in-a-drawer” drawout
panel. Each door has (three) standard IQ
cutouts with device panels. The IQ products
are not included.
Description Style Number
10 in. W x 30 in. D x 90 in. H
(bus compartment optional)
2147A95G35
Two 10 in. Wide Enclosures (Shown with
Optional 10 in. High Bus Compartment)
Addressable Relay II
The Addressable Relay II has two status
inputs and a Form C contact output. Input
rating: 48-120 VAC, 48-125 VDC. Output
contact rating: 10A @ 277 VAC, 10A @ 30
VDC. Features include a communications
watchdog and relay pulse. Baud rate is
selectable.
Refer to Page 130 of this document.
Low Resolution Photo
Low Resolution Photo
Description Catalog Number
Addressable Relay II ARII
March 2001