molded case circuit breakers - Eaton Canada

Clipper Power System
Transient Voltage Surge Suppressor
March 2001
DISTRIBUTION SWITCHBOARDS (LOW VOLTAGE)
WF/WRP, ES, Pow-R-Line C Assemblies, Circuit
Breakers, Fusible Switches and Renewal Parts
TECHNOLOGY UPGRADES
Clipper Power System is a hybrid transient
voltage surge suppressor used to protect
sensitive electronic equipment from the
damaging effects of voltage transients and
electrical line noise. The Clipper’s hybrid
design combines both suppression and filtering
elements to provide best in class
performance. Field installation is required.
Benefits
● Clipper can be externally mounted to
existing distribution equipment
● Five Models – 90kA, 120kA, 160kA,
250kA and 400kA
● Standard NEMA 12 Enclosure, Optional
NEMA 4
● Surface or Flush Mounting
● Full range of diagnostic options including
the Tri-Monitor
● Five Year Warranty
For more information about Clipper Power
Systems, contact your local Cutler-Hammer
Field Sales Office.
Pow-R-Command is a microprocessorbased
lighting control system designed
for today’s modern facilities. The system
may be utilized as a stand-alone or networked
as a system for the control of lighting
and other branch circuits.
Pow-R-Command Lighting Control System
System Features Include:
● Day/Date/Time of Day Scheduling
● Holiday Scheduling–up to 30 Days/Year
● Astronomical Time Scheduling
● Real Time Clock
● Hardware Diagnostics
● Off Warning by Blinking Lights
● Manual Load Override Control
● Brownout and Power Failure Recovery
● Telephone Override of Schedules
● Switch Override of Schedules
● Remote Access to System
● Dimming Systems for Fluorescent
Fixtures
● Priority Load Management
Existing facilities can be retrofitted to
include various Pow-R-Command scenarios,
allowing customers varying degrees of
control. For more information on upgrading
your building to include the energy
savings and control of Pow-R-Command,
contact your local Cutler-Hammer Field
Sales Office.
229
IQ and IMPACC Communications Retrofits
Cutler-Hammer offers IQ products to replace
existing analog meters, instruments and
protective relays with microprocessorbased
solid-state true-RMS sensing devices.
IQ products can be furnished as components
for field installation on the switchgear
or can be provided as new replacement
front panels. The new replacement
front panels available for DB switchgear
assemblies include the IQ devices mounted
and wired. The IQ products can be matched
in numerous combinations to include the
IQ Analyzer, IQ Data Plus II,
IQ Data,
IQ Generator, IQ Data Plus 4000/ 4100 and
the Assemblies Electronic Monitor (AEM II).
Communications can then be tied to the
Cutler-Hammer IMPACC System.
Digtrip Trip Unit Retrofit Kits
Trip unit retrofit kits are available for all
SPB breaker frames. Refer to pages 260-
261 of this publication.
P