molded case circuit breakers - Eaton Canada
molded case circuit breakers - Eaton Canada
molded case circuit breakers - Eaton Canada
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
244<br />
SWITCHGEAR (LOW VOLTAGE)<br />
DSII Assemblies, Power Circuit Breakers<br />
and Renewal Parts<br />
PRODUCT DESCRIPTION<br />
DSII Switchgear Assembly<br />
Typical Asheville Design, 1993<br />
REPLACEMENT CAPABILITIES<br />
Cutler-Hammer offers an extensive amount<br />
of products to support DSII switchgear:<br />
New DSII Air Circuit Breakers<br />
New DSII <strong>circuit</strong> <strong>breakers</strong> are available for<br />
replacement or to fill existing vacant cells.<br />
All <strong>breakers</strong> are newly manufactured and<br />
are mechanically and electrically the same<br />
as the <strong>breakers</strong> originally specified and<br />
supplied.<br />
DSII Circuit Breaker Provisions<br />
Breaker provisions are required in switchgear<br />
when there is an existing space in a<br />
structure that is to be filled with a breaker.<br />
Provisions are available for all ratings and<br />
TECHNOLOGY UPGRADES<br />
PowerNet Monitoring and Control System<br />
IQ and PowerNet Communications Retrofits<br />
Cutler-Hammer offers IQ products to replace<br />
existing analog meters, instruments, and<br />
protective relays with microprocessor-<br />
based solid-state true-RMS sensing devices.<br />
Westinghouse DSII switchgear with type<br />
DS (non-limiting) and type DSL (with limiters)<br />
low voltage air power <strong>circuit</strong> <strong>breakers</strong><br />
was introduced in 1993. The DSII and DSLII<br />
<strong>circuit</strong> <strong>breakers</strong> were incorporated in the<br />
DSII switchgear assembly in 1996. The design<br />
of the new DSII switchgear was not<br />
undertaken without the valued input of our<br />
customers. To determine what needed to<br />
be improved, changed and added, a survey<br />
of many of our customers was made. The<br />
results of this input centered around quality,<br />
cycle time reduction during both production<br />
and maintenance, standardization<br />
of wiring, placement of repetitive devices<br />
and ease of maintenance.<br />
DSII switchgear is constructed in accordance<br />
with ANSI C37.20.1, C37.51, NEMA<br />
SG3 and SG5, and UL Standards 1558 for<br />
low voltage, metal-enclosed drawout<br />
switchgear. As such, it contains low voltage<br />
power <strong>circuit</strong> <strong>breakers</strong>, type DS/DSL or<br />
DSII/DSLII as the principal overcurrent<br />
protective devices both as main and as<br />
feeder protection. The enhanced structure<br />
features of DSII switchgear allows the<br />
include all parts required to complete the<br />
cell in accordance with the switchgear as<br />
originally supplied.<br />
Factory Modification and Repair<br />
Factory modifications and repairs are<br />
available for new or customer owned DSII<br />
<strong>circuit</strong> <strong>breakers</strong>. This UL approved service<br />
includes trip unit replacements, conversion<br />
from manually operated to electrically<br />
operated, breaker calibrations, and the<br />
addition of numerous accessories for the<br />
DSII and DSLII <strong>circuit</strong> breaker.<br />
IQ products can be furnished as components<br />
for field installation on the switchgear<br />
or can be provided as new replacement<br />
front panels. The new replacement door<br />
panels available for DS switchgear assemblies<br />
include the IQ devices mounted and<br />
wired. The instrument compartment door<br />
will fit all vintages of DS switchgear from<br />
1968 to the present. Door panels can be<br />
supplied with analog instruments, breaker<br />
control devices, or any other device that<br />
will physically fit. The IQ products can be<br />
matched in numerous combinations to<br />
include the IQ Analyzer, IQ Data PlusII, IQ<br />
Data, IQ Generator, IQ Data Plus 4000/4100,<br />
and the Assemblies Electronic Monitor<br />
(AEMII). Communications can then be tied<br />
to the Cutler-Hammer PowerNet System.<br />
<strong>breakers</strong> to be positioned in the ”connected,“<br />
”test,“ ”disconnected,“ or ”remove“<br />
position with the breaker compartment<br />
door closed. This eliminates the danger of<br />
exposed live <strong>circuit</strong>s or protruding <strong>breakers</strong><br />
commonly associated with ”through the<br />
door drawout“ construction.<br />
Compartmentalization of the drawout<br />
<strong>breakers</strong> is part of the standard construction.<br />
DS/ DSL or DSII/DSLII <strong>circuit</strong> <strong>breakers</strong><br />
are designed to ANSI standards<br />
C37.13, C37.16 and C37.17 in frame sizes<br />
ranging from 800A to 5000A.<br />
Ratings<br />
DSII Switchgear Bus 800 – 6000A<br />
DSII/DSLII Breaker 15 – 5000A<br />
Voltage 208 – 600V<br />
Interrupting Capacity 30 – 200kA<br />
Chronology<br />
There have been five vintages of DS<br />
switchgear since the original design was<br />
manufactured in 1969. Today, many capabilities<br />
still exist to support the different<br />
vintages of DS switchgear.<br />
DSII Breaker Parts<br />
An extensive inventory of newly manufactured<br />
renewal parts for DSII and DSLII<br />
<strong>circuit</strong> <strong>breakers</strong> are available.<br />
DSII Switchgear Structure Parts<br />
DSII switchgear parts are available for<br />
most DS designs. Newly manufactured<br />
replacement parts (such as doors, breaker<br />
provisions, lift trucks, metering, etc.) are<br />
available.<br />
DSII Circuit Breaker with Digitrip RMS Trip Unit<br />
Family (T510, T610, T810, T910)<br />
Digitrip Trip Unit Retrofit Kits<br />
Trip unit retrofit kits are available for all DB<br />
breaker frames. Refer to pages 256-257 of<br />
this publication.<br />
March 2001