molded case circuit breakers - Eaton Canada

254
How To Select A Retrofit Kit
How To Generate A Catalog Number
How To Price A Kit
SWITCHGEAR (TRIP UNIT RETROFIT KITS)
Customer Required Information
CUSTOMER REQUIRED INFORMATION
To properly select a retrofit kit, the following
information is required:
● Breaker Nameplate Information
– Manufacturer
– Breaker Type
– Ampere Frame Size
– Manually or Electrically Operated
● Drawout or Fixed Mounting
● Fused or Non-Fused
● Digitrip Trip Unit Type Required
– 510, 610, 810, 910
● Protective Functions Required
– LI, LSI, LS, LIG, LSG, LSIG
Refer to pages 255-273 to view the Retrofit
Kit Catalog Numbers for specific breaker
manufacturers and frames. When used in
To correctly price a Low Voltage Digitrip
Retrofit Kit, refer to the Retrofit Kit Product
Guide. It is also available on FRED II
ACCESSORIES
● Continuous Current Rating Required
(Trip Rating of Breaker)
● 3-wire or 4-wire system (determines
number of sensors required)
NOTE: At the time of this publication, the standard trip units for
Low Voltage Digitrip Retrofit Kits are the RMS 510/610/810/
910. From 1989-1996, the standard trip units were the RMS
500/600/700/800. These trip units are no longer in production.
Replacement orders for the 500/600/700/800 trip units
will be filled by the equivalent 510/610/810/910 trip units.
Remember when replacing a 500/600/700/800 unit with a
510/610/810/910, the rating plug must also be replaced.
conjunction with the information obtained
from the section above, these pages con-
(412-937-6400) as Document #9375487.
This Product Guide includes base prices,
Catalog Number Style Number Description
PRTAAPM 1267C16G01 Aux. Power Module
8779C02G02 Amptector and Digitrip Test Set (Tests for both)
6503C53G01 Amptector Adapter Harness
6503C54G01 Amptector 2-Piece Adapter Harness (Test Set Half)
6503C55G01 Amptector 2-Piece Adapter Harness (Breaker Half)
6502C83G01 External Harness (Zone Interlock Shorting Plug)
8259A91G05 Auxiliary CPT Kit (Non-DS)
8259A91G06 Auxiliary CPT Kit (DS)
6506C34G01 Simplified Cell Harness 1 ft.
6506C34G02 Simplified Cell Harness 6 ft.
6506C34G03 Simplified Cell Harness 4 ft.
To properly select options, the following
questions need to be answered:
● Will customer supply 120 VAC control
power or is breaker-mounted CPT
needed?
– applies only to Digitrip 610, 810,
and 910
● Are zone interlocks required?
● Does the application require relay
outputs from the Digitrip 610, 810,
or 910 for remote indication?
● Does the breaker have an existing
Amptector or Digitrip Trip Unit
installed? If so, what is it?
tain all the information necessary to
generate a Catalog Number.
adders and options for all Low Voltage
Digitrip Retrofit Kits.
Rating plugs for the 500/600/700/800 trip units will still be
available. These rating plugs are not interchangeable with
the 510/610/810/910 trip units.
Likewise, rating plugs for the 510/610/810/910 are not interchangeable
with the 500/600/700/800 trip units.
March 2001