Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
Configuring Multiple Chassis
Configuring Service ID
100
Global Configuration
(default logical
system)
multi-chassis-protection {
peer 10.10.10.10 {
interface ge-0/0/0.0;
}
....
}
...
}
}
}
The protection interface can be an Ethernet type interface like ge, xe, or an aggregated
Ethernet (ae) interface.
A top-level hierarchy is used to specify multichassis-related configuration, as follows:
[edit]
multi-chassis {
multi-chassis-protection {
peer 10.10.10.10 {
interface ge-0/0/0;
}
}
}
The above example specifies interface ge-0/0/0 as the multichassis protection interface
for all the multichassis aggregated Ethernet (MC-AE) interfaces which are also part of
the peer. This can be overridden by specifying protection at the physical interface level
and the logical interface level.
You must configure the same unique network-wide configuration for a service in the set
of PE routers providing the service. You can configure the service IDs under the level of
the hierarchies shown in the following examples:
switch-options {
service-id 10;
}
bridge-domains {
bd0 {
service-id 2;
}
}
routing-instances {
r1 {
switch-options {
service-id 10;
}
bridge-domains {
bd0 {
service-id 2;
}
}
Copyright © 2012, Juniper Networks, Inc.