Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
service-name-tables
548
Syntax service-name-tables table-name {
service service-name {
drop;
delay seconds;
terminate;
dynamic-profile profile-name;
routing-instance routing-instance-name;
max-sessions number;
agent-specifier {
aci circuit-id-string ari remote-id-string {
drop;
delay seconds;
terminate;
dynamic-profile profile-name;
routing-instance routing-instance-name;
static-interface interface-name;
}
}
}
}
Hierarchy Level [edit protocols pppoe]
Release Information Statement introduced in Junos OS Release 10.0.
dynamic-profile, routing-instance, max-sessions, and static-interface options introduced
in Junos OS Release 10.2.
Description Create and configure a PPPoE service name table. Specify the action taken for each
Required Privilege
service and remote access concentrator on receipt of a PPPoE Active Discovery Initiation
(PADI) packet. You can also specify the dynamic profile and routing instance that the
router uses to instantiate a dynamic PPPoE interface, and the maximum number of active
PPPoE sessions that the router can establish with the specified service. A maximum of
32 PPPoE service name tables is supported per router.
Options table-name—Name of the PPPoE service name table, a string of up to 32 alphanumeric
Level
Related
Documentation
characters.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring PPPoE Service Name Tables on page 412
• Creating a Service Name Table on page 413
Copyright © 2012, Juniper Networks, Inc.