Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Hierarchy Level [edit protocols]
restore-interval number;
traceoptions {
file filename ;
flag flag;
}
}
Release Information Statement introduced in Junos OS Release 9.4.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Description Configure Ethernet ring protection switching.
Required Privilege
Level
Related
Documentation
protocol-down
The statements are explained separately. All statements apply to MX Series routers. EX
Series switches do not assign node-id and use control-vlan instead of control-channel.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Ethernet Ring Protection Switching Overview on page 437
• Ethernet Ring Protection Using Ring Instances for Load Balancing
• Example: Configuring Load Balancing Within Ethernet Ring Protection for MX Series
Routers
• Example: Configuring Ethernet Ring Protection Switching on EX Series Switches
• Configuring Ethernet Ring Protection Switching (CLI Procedure)
Syntax protocol-down;
Hierarchy Level [edit protocols oam ethernet link-fault-management action-profile event]
Release Information Statement introduced in Junos OS Release 8.5.
Description Upper layer indication of protocol down event. When the protocol-down statement is
Required Privilege
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
included, the protocol down event triggers the action specified under the action statement.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring an OAM Action Profile on page 300
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
539