Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
Related
Documentation
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
vlan-tags inner tpid.vlan-id outer tpid.vlan-id;
You can include these statements at the following hierarchy levels:
• [edit interfaces interface-name unit logical-unit-number]
• [edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number]
To configure aggregated Ethernet-specific physical interface properties, include the
aggregated-ether-options statement at the [edit interfaces aex] hierarchy level:
•
[edit interfaces aex]
aggregated-ether-options {
ethernet-switch-profile {
tag-protocol-id tpid;
}
(flow-control | no-flow-control);
lacp mode {
periodic interval;
}
link-protection;
link-speed speed;
(loopback | no-loopback);
minimum-links number;
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
}
Example: Configuring Gigabit Ethernet Interfaces on page 453
• 10-Gigabit Ethernet Framing Overview on page 355
• Ethernet Interfaces Overview on page 35
• Junos® OS Ethernet Interfaces
Configuring J Series Services Router Switching Interfaces
40
The J Series routers with multiport Gigabit Ethernet uPIMs supports Ethernet access
switching. This functionality provides the ability to switch traffic at Layer 2 in addition to
routing traffic at Layer 3.
J Series routers with multiport Gigabit Ethernet uPIMs can be deployed in branch offices
as an access or desktop switch with integrated routing capability. The multiport Gigabit
Ethernet uPIM provides Ethernet switching, while the Routing Engine provides routing
functionality.
Copyright © 2012, Juniper Networks, Inc.