Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
Related
Documentation
To configure flexible Ethernet services encapsulation, include the encapsulation
flexible-ethernet-services statement at the [edit interfaces et-fpc/pic/port ] hierarchy
level. For example:
•
interfaces {
et-fpc/pic/port {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
vlan-id 1000;
family inet {
address 11.0.0.20/24;
}
}
unit 1 {
encapsulation vlan-ccc;
vlan-id 1010;
}
unit 2 {
encapsulation vlan-tcc;
vlan-id 1020;
family tcc {
proxy {
inet-address 11.0.2.160;
}
remote {
inet-address 11.0.2.10;
}
}
}
}
}
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 384
Configuring Ethernet 802.3ah OAM on PTX Series Packet Transport Switches
388
The IEEE 802.3ah standard for Operation, Administration, and Management (OAM)
provides a specification for Ethernet in the first mile (EFM) connectivity. EFM defines how
Ethernet can be transmitted over new media types using new Ethernet physical layer
(PHY) interfaces. You can configure IEEE 802.3ah OAM on Ethernet point-to-point direct
links or links across Ethernet repeaters. The IEEE 802.3ah OAM standard meets the
requirement for OAM capabilities as Ethernet moves from being solely an enterprise
technology to being a WAN and access technology, as well as being backward-compatible
with existing Ethernet technology.
For Ethernet interfaces capable of running at 100 Mbps or faster, the IEEE 802.3ah OAM
standard is supported on numerous Juniper Networks routers and switches. This topic
describes configuration support for IEEE 802.3ah OAM features on PTX Series Packet
Transport Switches.
Copyright © 2012, Juniper Networks, Inc.