Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
link-discovery active;
pdu-interval 800;
pdu-threshold 4;
remote-loopback;
negotiation-options {
allow-remote-loopback;
}
event-thresholds {
frame-error 30;
frame-period 50;
frame-period summary 40;
symbol-period 20;
}
}
}
}
}
}
• link-fault-management on page 498
• IEEE 802.3ah OAM Link-Fault Management Overview on page 291
• Configuring IEEE 802.3ah OAM Link-Fault Management on page 293
• Enabling IEEE 802.3ah OAM Support on page 294
• Configuring Link Discovery on page 294
• Configuring the OAM PDU Interval on page 295
• Configuring the OAM PDU Threshold on page 296
• Configuring Threshold Values for Local Fault Events on an Interface on page 297
• Disabling the Sending of Link Event TLVs on page 298
• Detecting Remote Faults on page 299
• Configuring an OAM Action Profile on page 300
• Specifying the Actions to Be Taken for Link-Fault Management Events on page 301
• Monitoring the Loss of Link Adjacency on page 303
• Monitoring Protocol Status on page 303
• Configuring Threshold Values for Fault Events in an Action Profile on page 305
• Applying an Action Profile on page 305
• Setting a Remote Interface into Loopback Mode on page 306
• Enabling Remote Loopback Support on the Local Interface on page 307
• Junos® OS Ethernet Interfaces
Chapter 16: Configuring IEEE 802.3ah OAM Link-Fault Management
309