Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

CHAPTER 23
Configuring the 10-Gigabit Ethernet
DWDM Interface Wavelength
• 10-Gigabit Ethernet DWDM Interface Wavelength Overview on page 353
• Configuring the 10-Gigabit Ethernet DWDM Interface Wavelength on page 353
10-Gigabit Ethernet DWDM Interface Wavelength Overview
Related
Documentation
For MX960, M320, M120, T320, and T640 routers, the 10-Gigabit Ethernet DWDM PIC
enables you to configure 10-Gigabit Ethernet DWDM interfaces with full C-band
International Telecommunication Union (ITU)-Grid tunable optics, as defined in the
following specifications:
• Intel TXN13600 Optical Transceiver I2C Interface and Customer EEPROM Preliminary
Specification, July 2004.
• I2C Reference Document for 300 Pin MSA 10G and 40G Transponder, Edition 4, August
04, 2003.
By default, the wavelength is 1550.12 nanometers (nm), which corresponds to 193.40
terahertz (THz).
•
Configuring the 10-Gigabit Ethernet DWDM Interface Wavelength on page 353
• Junos® OS Ethernet Interfaces
Configuring the 10-Gigabit Ethernet DWDM Interface Wavelength
To configure the wavelength on a 10-Gigabit Ethernet DWDM interface, include the
wavelength statement at the [edit interfaces ge-fpc/pic/port optics-options] hierarchy
level:
Copyright © 2012, Juniper Networks, Inc.
[edit interfaces ge-0/0/0 optics-options]
wavelength nm;
For interface diagnostics, you can issue the show interfaces diagnostics optics ge-fpc/pic
/port operational mode command.
Table 34 on page 354 shows configurable wavelengths and the corresponding frequency
for each configurable wavelength.
353