Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
344
Related
Documentation
Only features that are supported across all of the linked devices will be supported in the
resulting LAG bundle. The following caveats apply to LAG bundles that involve 10-port
10-Gigabit Ethernet LAN/WAN PIC (PD-5-10XGE-SFPP) ports:
• Non-standard TPID for VLAN tagging is not supported, except for 0x8100.
• The number of user created IFLs is limited to 4065/PIC and 1022/port.
• Classifier tables are limited to 8 for each BA classifier type.
• Forwarding classes are limited to 8.
• The guaranteed-rate and shaping-rate statements are not supported at the IFD level.
• The per-unit-scheduler and hierarchical-scheduler statements are not supported.
• Only the strict-high and low levels of scheduling priorities are supported.
• The excess-priority configuration is not supported.
• The buffer-size configuration under schedulers is not supported.
• WRED is not supported.
• srTCM and trTCM are not supported.
• Shared scheduler mode is not supported.
Table 32 on page 344 10-port 10-Gigabit Ethernet LAN/WAN PIC with SFP+
(PD-5-10XGE-SFPP).
Table 32: Capabilities of 10-Gigabit Ethernet LAN/WAN PICs
•
Capability
Maximum VLANs per PIC
Maximum VLANs per port
MAC learning per port
MAC accounting per port
MAC filtering per port
MAC policers
Classifers
Support
4065
1022
960
960
960 (64 filters per physical or logical
interface)
960 filters across multiple logical interfaces
128 ingress Mac policers
128 egress Mac policers
Eight classifiers per PIC for each BA classifier
type
Configuring Line-Rate Mode on 10-Gigabit Ethernet LAN/WAN PIC Supporting
Oversubscription on page 345
Copyright © 2012, Juniper Networks, Inc.