21.03.2013 Views

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Junos ®<br />

<strong>OS</strong> 12.3 <strong>Ethernet</strong> <strong>Interfaces</strong> <strong>Configuration</strong> Guide<br />

Configuring Faster Convergence<br />

234<br />

maintenance-association ma1 {<br />

protect-maintenance-association ma2;<br />

continuity-check {<br />

interval 100ms;<br />

connection-protection-tlv;<br />

}<br />

mep 100 {<br />

interface ge-1/1/0.0;<br />

direction down;<br />

auto-discovery;<br />

}<br />

}<br />

maintenance-association ma2 {<br />

continuity-check {<br />

interval 100ms;<br />

connection-protection-tlv;<br />

}<br />

mep 101 {<br />

interface ge-1/2/0.0;<br />

direction down;<br />

auto-discovery;<br />

}<br />

remote-mep 100<br />

action-profile p1;<br />

}<br />

}<br />

}<br />

}<br />

You can apply an action profile to provide faster convergence for dual-homed<br />

multipoint-to-multipoint network topologies. If a multipoint-to-multipoint <strong>Ethernet</strong><br />

service uses MAC-based forwarding and stale MAC addresses exist in the learning tables,<br />

this can result in traffic black holes in the network where incoming traffic is silently<br />

discarded, without informing the source that the data did not reach its intended recipient.<br />

With the profile configuration, if the interface-status TLV received on the protect interface<br />

is up, then the interface-status TLV on the working interface is marked as down and the<br />

PE device for the protect interface propagates a remote MAC-flush message to the PE<br />

devices in the virtual private LAN service (VPLS) by using TLDP-MAC-FLUSH. The MAC<br />

flush avoids traffic blackholing due to stale mac-db entries.<br />

To configure the interface-status-tlv down event, include the interface-status-tlv down<br />

statement at the [edit protocols oam ethernet connectivity-fault-management<br />

action-profile profile-name event] hierarchy level.<br />

To configure propagate-remote-flush as the action profile’s action, include the<br />

propagate-remote-flush statement at the [edit protocols oam ethernet<br />

connectivity-fault-management action-profile profile-name action] hierarchy level.<br />

To configure propagate-remote-flush as the clear-action, include the<br />

propagate-remote-flush statement at the [edit protocols oam ethernet<br />

connectivity-fault-management action-profile profile-name clear-action] hierarchy level.<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!