Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Copyright © 2012, Juniper Networks, Inc.
ip {
layer-3 {
source-ip-only | destination-ip-only;
}
layer-4;
}
}
symmetric-hash {
[complement;]
}
}
For load-balancing Layer 2 traffic based on Layer 3 fields, you can configure 802.3ad
LAG parameters at a per PIC level. These configuration options are available under the
chassis hierarchy as follows:
[edit chassis]
fpc X {
pic Y {
.
.
.
hash-key {
family inet {
layer-3;
layer-4;
symmetric-hash {
[complement;]
}
}
family multiservice {
source-mac;
destination-mac;
payload {
ip {
layer-3 {
source-ip-only | destination-ip-only;
}
layer-4;
}
}
symmetric-hash {
[complement;]
}
}
}
.
.
.
}
}
Chapter 4: Configuring Aggregated Ethernet Interfaces
127