Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

static-interface
Syntax static-interface interface-name;
Hierarchy Level [edit protocols pppoe service-name-tables table-name service service-name agent-specifier
aci circuit-id-string ari remote-id-string]
Release Information Statement introduced in Junos OS Release 10.2.
Description Reserve the specified static PPPoE interface for use only by the PPPoE client with
Required Privilege
matching agent circuit identifier (ACI) and agent remote identifier (ARI) information. You
can specify only one static interface per ACI/ARI pair configured for a named service
entry, empty service entry, or any service entry in the PPPoE service name table.
The static interface associated with an ACI/ARI pair takes precedence over the general
pool of static interfaces associated with the PPPoE underlying interface.
If you include the static-interface statement in the configuration, you cannot also include
either the dynamic-profile statement or the routing-instance statement. The
dynamic-profile, routing-instance, and static-interface statements are mutually exclusive
for ACI/ARI pair configurations.
Options interface-name—Name of the static PPPoE interface reserved for use by the PPPoE client
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
with matching ACI/ARI information. Specify the interface in the format pp0.logical,
where logical is a logical unit number from 0 through 16385 for static interfaces.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring PPPoE Service Name Tables on page 412
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
• Reserving a Static PPPoE Interface for Exclusive Use by a PPPoE Client on page 419
555