Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
remote-mep
Syntax remote-mep mep-id {
action-profile profile-name;
sla-iterator-profile profile-name {
data-tlv-size size;
iteration-count count-value;
priority priority-value;
}
}
Hierarchy Level [edit protocols oam ethernet connectivity-fault-management maintenance-domain md-name
maintenance-association ma-name mep mep-id]
Release Information Statement introduced in Junos OS Release 8.4.
Description Configure the numeric identifier of the remote maintenance association end point (MEP)
Required Privilege
request
542
within the maintenance association.
Options mep-id—Numeric identifier of the MEP.
Level
Related
Documentation
Range: 1 through 8191
The remaining statements are explained separately.
Configure—To enter configuration mode.
Control—To modify any configuration.
• Configuring a Maintenance Endpoint on page 191
Syntax request (protect | working);
Hierarchy Level [edit interfaces interface-name sonet-options aps]
Release Information Statement introduced before Junos OS Release 7.4.
Description Perform a manual switch between the protect and working circuits. This statement is
Required Privilege
honored only if there are no higher-priority reasons to switch.
Options protect—Request that the circuit become the protect circuit.
Level
Related
Documentation
working—Request that the circuit become the working circuit.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring Switching Between the Working and Protect Circuits
• force
Copyright © 2012, Juniper Networks, Inc.