Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
routing-instance (PPPoE Service Name Tables)
544
Syntax routing-instance routing-instance-name;
Hierarchy Level [edit protocols pppoe service-name-tables table-name service service-name],
[edit protocols pppoe service-name-tables table-name service service-name agent-specifier
aci circuit-id-string ari remote-id-string]
Release Information Statement introduced in Junos OS Release 10.2.
Description Use in conjunction with the dynamic-profile statement at the same hierarchy levels to
Required Privilege
specify the routing instance in which to instantiate a dynamic PPPoE interface. You can
associate a routing instance with a named service entry, empty service entry, or any service
entry configured in a PPPoE service name table, or with an agent circuit identifier/agent
remote identifier (ACI/ARI) pair defined for these services.
The routing instance associated with a service entry in a PPPoE service name table
overrides the routing instance associated with the PPPoE underlying interface on which
the dynamic PPPoE interface is created.
If you include the routing-instance statement at the [edit protocols pppoe
service-name-tables table-name service service-name agent-specifier aci circuit-id-string
ari remote-id-string] hierarchy level, you cannot also include the static-interface statement
at this level. The routing-instance and static-interface statements are mutually exclusive
for ACI/ARI pair configurations.
Options routing-instance-name—Name of the routing instance in which the router instantiates the
Level
Related
Documentation
dynamic PPPoE interface.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring PPPoE Service Name Tables on page 412
• Assigning a Dynamic Profile and Routing Instance to a Service Name or ACI/ARI Pair
for Dynamic PPPoE Interface Creation
Copyright © 2012, Juniper Networks, Inc.