Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
When the PIC is in aggregated Ethernet mode, the two physical interfaces on the same
PIC are aggregated into one aggregated Ethernet physical interface. When the PIC is
configured with two physical interfaces, it creates the physical interfaces et-x/y/0:0 and
et-x/y/0:1, where x is the FPC slot number and y is the PIC slot number. For example, to
configure two physical interfaces for PIC slot 0 in FPC slot 5:
1. Specify the number of aggregated Ethernet interfaces to be created.
[edit chassis]
user@host# set aggregated devices ethernet device-count count
For example:
[edit chassis]
user@host# set aggregated devices ethernet device-count 1
2. Specify the members to be included within the aggregated Ethernet bundle.
[edit interfaces ]
user@host# set interface-name gigether-options 802.3ad bundle
The following example shows how to configure two physical interfaces for PIC 0 on
a T1600 router.
[edit interfaces ]
user@host# set et-5/0/0:0 gigether-options 802.3ad ae0
user@host# set et-5/0/0:1 gigether-options 802.3ad ae0
3. Verify the configuration at the chassis.
[edit ]
user@host# show chassis
aggregated-devices {
ethernet {
device-count 1;
}
}
4. Verify the configuration at the interface.
[edit ]
user@host# show interfaces
et-5/0/0:0 {
gigether-options {
802.3ad ae0;
}
}
et-5/0/0:1 {
gigether-options {
802.3ad ae0;
}
}
• Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
PF-1CGE-CFP on page 374
Chapter 27: Configuring 100-Gigabit Ethernet PICs/MICs
377