Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
390
Related
Documentation
Supported features include:
• Maintenance domain (maintenance-domain domain-name) and maintenance levels
(level number).
• Maintenance association (maintenance-association ma-name), including name formats
(name-format and short-name-format for vlan and 2octet), loss threshold
(loss-threshold number), and hold interval (hold-interval minutes).
• maintenance association endpoint (MEP) functions, including Maintenance Endpoint
ID (mep mep-id), direction down (direction down), and autodiscovery (auto-discovery).
• Link trace for down MEPs (link-down).
• action profile (action-profile profile-name)
• Loopback message generation and reply for down MEPs.
Features that are not supported include:
• Up MEP configuration.
• maintenance association intermediate point (MIP) configuration.
To configure flexible Ethernet services encapsulation on PTX Series Packet Transport
Switches, include the oam statement at the [edit protocols] hierarchy level. For example:
•
[edit protocols]
oam {
ethernet {
connectivity-fault-management {
maintenance-domain md1 {
level 0;
maintenance-association ma1 {
continuity-check {
interval 100ms;
}
mep 1 {
interface et-0/1/1;
direction down;
auto-discovery;
}
}
}
}
}
}
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 384
• IEEE 802.1ag OAM Connectivity Fault Management Overview on page 181
Copyright © 2012, Juniper Networks, Inc.