Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
• Junos® OS Ethernet Interfaces
Configuring a Connectivity Fault Management Action Profile
You can configure an action profile and specify the action to be taken when any of the
configured events occur. Alternatively, you can configure an action profile and specify
default actions when connectivity to a remote maintenance association endpoint (MEP)
fails.
To configure the action profile name, include the action-profile statement at the [edit
protocols oam ethernet connectivity-fault-management] hierarchy level.
• Configuring the Action of a CFM Action Profile on page 196
• Configuring the Default Actions of a CFM Action Profile on page 196
• Configuring a CFM Action Profile Event on page 197
Configuring the Action of a CFM Action Profile
You can configure the action to be taken when any of the configured events occur.
To configure the action profile’s action, include the action statement at the [edit protocols
oam ethernet connectivity-fault-management action-profile profile-name] hierarchy level.
[edit protocols oam]
ethernet {
connectivity-fault-management {
action-profile bring-down {
event {
interface-status-tlv down;
}
action {
interface-down;
}
}
}
}
Configuring the Default Actions of a CFM Action Profile
196
You can configure the default actions to be taken when connectivity to a remote MEP
fails.
To enable the interface-down as the default action for an action profile, include the
interface-down statement at the [edit protocols oam ethernet
connectivity-fault-management action-profile profile-name default-actions] hierarchy
level.
[edit]
protocols {
oam {
ethernet {
connectivity-fault-management {
Copyright © 2012, Juniper Networks, Inc.