Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
switch-port
558
Syntax switch-port port-number {
(auto-negotiation | no-auto-negotiation);
speed (10m | 100m | 1g);
link-mode (full-duplex | half-duplex);
}
Hierarchy Level [edit interfaces ge-pim/0/0 switch-options]
Release Information Statement introduced in Junos OS Release 8.4.
Description On a J Series Services Router with Ethernet uPIMs installed and operating in access
Required Privilege
switching mode, configuration of the physical port characteristics, done under the single
physical interface.
Default Autonegotiation is enabled by default. If the link speed and duplex are also configured,
the interfaces use the values configured as the desired values in the negotiation.
Options port-number—Ports are numbered 0 through 5 on the 6-port Gigabit Ethernet uPIM, 0
Level
Related
Documentation
through 7 on the 8-port Gigabit Ethernet uPIM, and 0 through 15 on the 16-port Gigabit
Ethernet uPIM.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring J Series Services Router Switching Interfaces on page 40
Copyright © 2012, Juniper Networks, Inc.