Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Configuring Two UNIs Sharing the Same EVC
•
[edit protocols]
oam {
ethernet {
connectivity-fault-management { ...}
evcs {
evc1 {
evc-protocol cfm management-domain md management-association 1;
remote-uni-count 1;
}
}
lmi {
interface ge-2/2/1 {
evc evc1 {
vlan-list 0-4095;
}
evc-map-type all-to-one-bundling;
uni-id uni-ce1;
}
interface ge-2/3/1 {
evc evc1 {
vlan-list 0-4095;
}
evc-map-type all-to-one-bundling;
uni-id uni-ce2;
}
}
}
}
connectivity-fault-management
• IEEE 802.1ag OAM Connectivity Fault Management Overview on page 181
• Creating the Maintenance Domain on page 184
• Configuring Maintenance Intermediate Points on page 185
• Creating a Maintenance Association on page 187
• Continuity Check Protocol on page 188
Chapter 13: Configuring IEEE 802.1ag OAM Connectivity-Fault Management
• Configuring a Maintenance Endpoint on page 191
• Configuring a Connectivity Fault Management Action Profile on page 196
• Configuring Linktrace Protocol in CFM on page 199
• Configuring Port Status TLV and Interface Status TLV on page 208
• Configuring MAC Flush Message Processing in CET Mode on page 220
• Configuring M120 and MX Series Routers for CCC Encapsulated Packets on page 223
• Configuring Rate Limiting of Ethernet OAM Messages on page 225
• Configuring 802.1ag Ethernet OAM for VPLS on page 228
207