Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

lacp
lacp (802.3ad)
See the following sections:
• lacp (802.3ad) on page 495
• lacp (Aggregated Ethernet) on page 496
Syntax lacp {
traceoptions {
file lacpd;
flag all;
}
ppm (centralized | distributed);
}
Hierarchy Level [edit interfaces interface-name fastether-options 802.3ad],
[edit interfaces interface-name gigether-options 802.3ad]
Release Information Statement introduced in Junos OS Release 9.3.
The ppm (centralized | distributed) option introduced in Junos OS Release 9.4.
Description For aggregated Ethernet interfaces only, configure the Link Aggregation Control Protocol
Required Privilege
(LACP).
On MX and T Series routers you can specify distributed or centralized periodic packet
management (PPM).
Default If you do not specify lacp as either active or passive, LACP remains passive.
If you do not specify ppm as either centralized or distributed, PPM is distributed.
Options • active—Initiate transmission of LACP packets.
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
• passive—Respond to LACP packets.
• ppm—Set PPM to centralized or distributed.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring Aggregated Ethernet LACP on page 112
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
495